Steel tees

Characteristics
Delivery

Item type

Стальные тройники

Standard

ГОСТ 17376-2001

Diameter (Dу)

150 - 1000 мм

Pressure (Py)

1.0; 1.6; 2.5; 4.0; 6.3 МПа

Steel grade

ст.20, 20ЮЧ, 09Г2С, 15ХМ, 13ХФА, 12Х18Н10Т

Manufacturer

ООО "Завод кольцевых заготовок"

The company has a self-pickup system.

Receiving the goods at the address

Working hours: Mon-Fri from 9.00 to 17.00

Address: 644036, Omsk, st. 3rd Kazakhstan, 4

Departure to other cities of the Russian Federation through transport companies.

Sending is made after 100% payment for the goods, unless otherwise specified in the Delivery Specifications.

Steel tees are pipe fittings that allow you to connect additional branches to the main pipe for branching the flow of the working medium. They are manufactured by cold stamping, welded and stamped-welded methods, followed by heat treatment.

Depending on the ratio of the body and neck diameters, transition and equal tees are distinguished:

Reducing tees have different diameters of body and neck bores. These tees use smaller diameter pipe branches to the longitudinal axis of the main line. Manufactured in accordance with GOST 17376-2001 from DN 150 to DN 400 mm.
equal tees, unlike transition tees, have the same diameters of the body and neck holes. Manufactured in accordance with GOST 17376-2001 from DN 150 to DN 1000 mm.

Tees installed on pipelines are exposed to significant dynamic loads and the action of relatively high temperatures and pressures, therefore, they are subject to increased requirements for strength and reliability, corrosion and cold resistance, and the ability to work in an aggressive environment.

Steel tees are made of the following steel grades: 20, 20Yuch, 09G2S, 12H1MF, 13HFA, 15HM, 15H5M, 12H18H10T and 10H17H13M2T.

Leave a request

Request a call